BorkBork
Well-Known Member
- Joined
- Apr 13, 2002
- Messages
- 842
- Reaction score
- 3
I thought the biggest problem with gonzo was his nose. It's not. It's probably the easiest part. I did some experimenting and did a rough gonzo nose in about 20 minutes.
I did it not with carving a block of foam, but with 2 flat pieces of very thin (1 cm) foam. I glued them down the middle as you do with most puppetheads and voila, a gonzo nose.
As i said, it's very rough, i did it fast, not carefuly, so you can se i used too much glue, cuz the glur shows. But when i am actually going to make a gonzo puppet i will be more careful.
Here are the pics
http://muppets.zapto.org/images/gonzo
Enjoy!
/Anders
I did it not with carving a block of foam, but with 2 flat pieces of very thin (1 cm) foam. I glued them down the middle as you do with most puppetheads and voila, a gonzo nose.
As i said, it's very rough, i did it fast, not carefuly, so you can se i used too much glue, cuz the glur shows. But when i am actually going to make a gonzo puppet i will be more careful.
Here are the pics
http://muppets.zapto.org/images/gonzo
Enjoy!
/Anders